-
Antistatic Agent 163
Product Name: Antistatic Agent 163 Chemical Description: Ethoxylated amine Specification Appearance: Clear transparent liquid Effective component: ≥97% Amine value (mgKOH/g): 190±10 Dropping point (℃) : -5-2 Moisture content: ≤0.5% Solubility: Insoluble in water, soluble in ethanol, chloroform and other organic solvents. Applications: It is an efficient internal antistatic agent of plastic products, suitable for variety plastics of polyethylene, polypropylene films, sheets ... -
Anti-static Agent DB200
PRODUCT SPECIFICATION: Appearance: White to slight yellow oblate granular solid, Features: ,Amine type Of non-ionic surfactant Assay of active matter: 99% Amine value≥60 mg KOH/g, volatile matter≤3%, Melting point :50°C, Decomposition temperature: 300°C, Toxicity LD50≥5000mg/KG. Uses This product is designed for PE、PP、PA products,dosage is 0.3-3%, Antistatic effect:the surface resistance can reach 108-10Ω. PACKING 25KG/CARTON STORAGE Prevent from water, moisture and insolation, ... -
Antistatic Agent DB209
Product Name: Antistatic Agent DB209 Specification Appearance: White powder or granule Specific gravity: 575kg/m³ Melting point: 67℃ Applications: DB209 is a newly developed high-activity ester antistatic agent, which has the effect of controlling static electricity. It is suitable for various thermoplastic polymers, such as polyethylene, polypropylene, soft and rigid polyvinyl chloride, and its thermal stability is better than other conventional antistatic agents. It has a faster antistatic ... -
Anti-static Agent DB803
PRODUCT SPECIFICATION Appearance: white or yellowish granule or powder. Effective Matter Content: ≥99% AmineValue: 60-80mgKOH/g Melting Point: 50°C Decomposition Temperature: 300°C Toxicity: LD50>5000mg/kg (acute toxicity test for mice) Type: nonionic surfactant. Features: greatly reduce the surface resistance of plastic products to 108-9Ω, high-efficiency and permanent antistatic performance, appropriate compatibility with resin and no effect on process and use performances of products, s... -
Antistatic Agent 129A
Product Name: Antistatic Agent 129A Specification Appearance: White powder or granule Specific gravity: 575kg/m³ Melting point: 67℃ Applications: 129A is a newly developed high-activity ester antistatic agent, which has the effect of controlling static electricity. It is suitable for various thermoplastic polymers, such as polyethylene, polypropylene, soft and rigid polyvinyl chloride, and its thermal stability is better than other conventional antistatic agents. It has a faste... -
Light stabilizer
Light stabilizer is an additive for polymer products (such as plastic, rubber, paint, synthetic fiber), which can block or absorb the energy of ultraviolet rays, quench singlet oxygen and decompose hydroperoxide into inactive substances, etc., so that polymer can eliminate or slow down the possibility of photochemical reaction and prevent or delay the process of photoaging under the radiation of light, thus achieving the purpose of prolonging the service life of polymer products. Product list... -
Light Stabilizer 944
LS-944 can be applied to low density polyethylene, polypropylene fiber and glue belt, EVA ABS, polystyrene and foodstuff package, etc.
-
Flame Retardant APP-NC
Specification Appearance White,free-flowing powder Phosphorus ,%(m/m) 20.0-24.0 Water content ,%(m/m) ≤0.5 Thermal decompositions,℃ ≥250 Density at 25℃,g/cm3 approx. 1.8 Apparent density,g/cm3 approx. 0.9 Particle size (>74µm) ,%(m/m) ≤0.2 particle size(D50),µm approx. 10 Applications: Flame Retardant APP-NC may be mostly used in a range of thermoplastics, especially PE, EVA, PP, TPE and rubber etc., whic... -
Ammonium polyphosphate (APP)
Structure : Specification: Appearance White,free-flowing powder Phosphorus %(m/m) 31.0-32.0 Nitrogen %(m/m) 14.0-15.0 Water content %(m/m) ≤0.25 Solubility in water(10%suspension) %(m/m) ≤0.50 Viscosity (25℃, 10%suspension) mPa•s ≤100 pH value 5.5-7.5 Acid number mg KOH/g ≤1.0 Average particle size µm approx. 18 Particle size %(m/m) ≥96.0 %(m/m) ≤0.2 Applications: As flame retardant for flame retardant fiber, wood, plastic, fire retardant coating, etc... -
UV absorber
UV absorber is a kind of light stabilizer, which can absorb the ultraviolet part of sunlight and fluorescent light source without changing itself.
-
Nucleating agent
Nucleating agent promotes the resin to crystallize by providing crystal nucleus and makes the structure of the crystal grain fine, thus improving the products’ rigidity, heat distortion temperature, dimension stability, transparency and luster. Product list: Product Name CAS NO. Application NA-11 85209-91-2 Impact copolymer PP NA-21 151841-65-5 Impact copolymer PP NA-3988 135861-56-2 Clear PP NA-3940 81541-12-0 Clear PP -
Anti-microbial agent
End-use bacteriostatic agent for the manufacture of polymer/plastic and textile products. Inhibits the growth of non-health related microorganisms such as bacteria, mold, mildew, and fungus that may cause odor, stain, discoloration, unsightly texture, decay, or deterioration of physical properties of the material and finished product. Product type Silver on Antibacterial Agent